0  item(s)
Total: $0.00

m menu image  m home m cart


My HAM station is for sale
Recent Products
Amateur Radio Accessories
Antennas, OCF Parts
Amateur Radio Base Station Antennas
Amateur Radio VHF & UHF Antennas
Amateur Radio Mobile Antennas & Accessories
Antenna T2FD Accessories
Antenna accessories
Transceivers, HandHeld Radios, & Accessories
ABS Project Boxes & Enclosures
Programming Cables for Transceivers
BALUNS, UNUNS & Line Isolators
Ferrites, Toroids, Noise suppressors
RASCAL- PSK31 interface USB or SERIAL
RASCAL Mk IV for SoundCard
PacketRadio TNC & EPROMs
Cables, Packet Radio and Sound Card
Cables, RASCAL & TNC2 to Radio
Audio-Video Cables & Connectors
QRP and Crystal Radios
Coax Adapters, Connectors & Jumpers
Cable; Coaxial, Rotor & Wire
Cable; Ladder-Line & Twin Lead
Watt Meters, RF Power & SWR
Linear Amplifiers & Components
Eyebolts, Grounding, U Bolts
Insulators, Pulleys & Rope
H'dwe, Screws, Nuts, ShrinkTube
Microphones, Headsets, & Cables
Microphone Connectors & Parts
Computer Accessories
HDTV Antennas, & Accessories
Fuse Holders and Fuses
Power Cords & Connectors
Power Supplies & Accessories
Solder-Stations, Tools, & Test Equipment
Meters, DVM, VOM, Panel
Speakers and Accessories
SoundCard & Electronic kits->
Switches & Relays
Transformers, Audio and Power
Capacitors, Fixed & Variable
Resistors, Fixed & Variable
Diodes, LED, Signal, Switching, & Zener
Opto Isolators and Opto Couplers
Tubes, Transistors, IC's AF, RF, & Switching
RF Coils & Chokes
PacketRadio TNCs to Radio Cables
Terminal Posts & Solder Lugs
Discount, Specials & more
Clearance and Closeout Items

Specials ...
New Products ...
Featured Products ...
All Products ...

Who's Online

There currently are 41 guests online.

Mobile BALUN designed to put the RF power into your mobile antenna. BUXCOMM Master Match Mobile BALUN.

Sale: $35.96
Save: 10% off

cat#     B1K5022   An exclusive BUXCOMM Master Match Mobile BALUN

Here is the Mobile BALUN designed for serious HF mobile operator's. 
All items shown in the photo are included with the BUXCOMM B1K5022. 
We designed this asymmetrical to asymmetrical B5022 for use with both: 

screw-driver type and end (bottom) fed vertical mobile antennas

We include a coax jumper terminated with a PL259 at one end and ring-terminal connectors at the other end.

Install this BUXCOMM mobile B1K5022 where it counts and where every watt is important.
The BUXCOMM B1K5022 puts the RF power into your mobile antenna to radiate. 
Without an asymmetrical to asymmetrical UNUN at the input of your mobile antenna,
much of the RF power can become reflected (lost) power (VSWR).

The mobile radio operator's finds the BUXCOMM B1K5022
to be an asset when feeding the mobile antenna.  Enjoy maximum
transfer of RF energy to your antenna for new found coverage and
DX mobile communications.

This HF mobile BALUN covers 1.8 MHz. through 35 MHz. This BUXCOMM
Master Match Mobile 5022  is rated at 1000 watts SSB.  Our new BUXCOMM B1K5022
will match 50 ohms to lower impedances from 1.5 MHz to 35 MHz.  

More than 95% of all HF mobile antennas exhibit a low impedance input, between 12
and 32 ohms.  Our new BUXCOMM model B1K5022 HF mobile BALUN will match 50 ohm
coax to mobile antennas having impedance(s) from 12 to 33 ohms.  I designed this
asymmetrical to asymmetrical B1K5022 for mobile applications because most mobile
antennas exhibit a very low input impedance.

NOTICE:  If your screw-driver antenna requires phantom voltage (DC) on the coax
feed-line to run the DC motor of your screw-driver antenna, this BALUN will not pass DC,
and should not be used where phantom DC voltage for the DC motor is fed via the coax.

*Style and color may vary.    Performance per above specs.
Seal all terminals with CoaxSeal CS-104

Add to Cart:

  • Shipping Weight: 1lbs

Parse Time: 0.258 - Number of Queries: 227 - Query Time: 0.045206136764526